IPs and ports for firewall setup
For the purpose of whitelisting, all of the DeployBot servers reside within the following IP addresses:
Note: If you want to automate your firewall setup, you can use our DNS record that lists all the IPs as A records. You can fetch it with this command:
dig +short servers.deploybot.com
In order for deployments to work properly with your server, you need to make sure that all relevant ports are open in your firewall:
- For passive FTP, open ports 20 and 21, and all ports higher than 1023 (up to 65535).
- For active FTP, open port 21.
- For SFTP, open port 22.
- For shell, open port 22.
Will DeployBot work with my VPN?
For security reasons, many corporate networks are behind a firewall or VPN technology. In this type of scenario, using a service like DeployBot will likely not work by default. You will have to contact your IT department or system admins to request that they allow connections to DeployBot's IP addresses (listed above).
Old Network IPs
If you're looking to remove DeployBot's old network IPs they were:
These CIDR ranges include: 18.104.22.168 – 22.214.171.124